How To Change Aspect Ratio Of Project In Premiere Pro

Knowing how to change the size and the aspect ratio of your video is one of the almost important basics of video editing, the wrong aspect ratio tin can cause you a lot of problems when editing and uploading your video. In this article, I will guide you through the steps of changing the attribute ratio in Adobe premiere pro.

The difference between size and aspect ratio

The difference betwixt video size and its aspect ratio can be a little confusing, but I'll make sure to articulate it for you before we continue with the article.

The size of the video basically means the verticle and the horizontal values of the video, while the aspect ratio is the ratio between the ii values. That means there tin can be two unlike videos with two different sizes but their aspect ratios are the same.

A good case of this is the difference between a 4K video and a 1080p video, both videos have an aspect ratio of 16:nine only when it comes to the size the 4K video is much bigger than the 1080p one. The 4K video is 3840×2160 pixels while the 1080p ane is 1920×1080.

Types of aspect ratios

Widescreen (16:nine)

This is the almost commonly used aspect ratio, information technology'southward used for youtube videos, movies, documentaries, and most of the videos online

Vertical (9:16)

This type of video can be found in Tiktok, Instagram, youtube short, and it's the same attribute ratio of your phone when filming vertically.

Square (ane:ane)

This blazon of aspect ratio normally takes a square form and it was used on the old versions of Instagram and Facebook earlier the recent updates.

Anamorphic (2.40:one)

This aspect ratio is more often than not used in movies or in cinematic videos, it'southward very like to the starting time aspect ratio that we mentioned (xvi:9) just information technology is cropped from the superlative and push which gives it that cinematic look.

Some people call it the cinematic horizontal black bars and if you lot want to learn how to achieve it and make your video await more cinematic go on reading because I'll talk about it at the cease.

How to alter The attribute ratio

To alter the Attribute ratio in premiere pro go to File>New>Sequence>settings>Frame size if you lot want to open a new projection, and Sequence>Sequence Settings>Frame size to change the aspect ratio of an already existing project.

Now that you know how to change the aspect ratio, nosotros need to talk over how to achieve certain attribute ratios by changing the horizontal and vertical values of the video

How to alter the attribute ratio to 16:9 (1.85:i)

To change the aspect ratio to 16:9 y'all'll need to go to sequence settings as we showed earlier and change the Horizant value to "3840" and the vertical to "2160" for a 4K UHD quality and for 1080p Hard disk quality alter the values to "1920" Horizontal and "1080" vertical.

How to Add together The Cinematic Horizontal Black Bars in Premiere Pro

One of the best ways to brand a video expect more cinematic is by adding horizontal blackness bars on it, those confined give more depth to the video and usually are very useful for wide shots.

And there are iii ways to attain those black confined in premiere pro;

The first one is by simply going to google and downloading the "Cinematic black bar" PNG after y'all simply drag it and drop it over your video.

The 2nd mode to exercise information technology is by using an adjustment layer. to practise it you lot'll need to:

Get to File>New>Adjustment layer,
Elevate the aligning layer over the clips you want to add the black bars to
And then go to Effects>Video effects>Transform>Crop
Drop the effecton the adjustment layer
Go to the effects control pannel and change the values Top and Bottom to 12%

The Third and the best manner to practise it and the mode that professionals in Hollywood exercise it is by changing the aspect ratio:

You'll demand to get to Sequence>Sequence settings and change the vertical value from "1080" to "803" for 1080p quality and from "2160" to "1606" for 4K quality. the black bars may non appear when working on premiere pro, but when y'all upload it on another screen those blackness bars will appear since the background of the screen is usually black.

And the way I got these numbers is I dividing the horizontal value of my original sequence or video by 2.39, then f you lot have a different value than the ones that I mention you lot can apply this method to decide the value that works for you.

And the reason that the third way is the best way, information technology'south because it'south faster while rendering since there are much fewer pixels to render and as well considering it provides a higher quality compared to the showtime two methods.

Source: https://creatorsfield.com/how-to-change-the-size-and-aspect-ratio-of-your-video-in-adobe-premiere-pro-tutorial/

Posted by: richardsonreepris1964.blogspot.com